Skip to content
GUIDEDeep dive

Dew Point: The One Number That Decides

Condensation depends on two things only: the air's dew point and the coldest surface temperature.

Updated 2026-11-20 · Formula checked

How to read it

Record attic temperature and RH, then convert to dew point.

For example 20 °C at 50% RH gives a dew point near 9 °C; surfaces below that condense.

In winter the roof sheathing often sits below 0 °C, so 50% indoor RH almost guarantees frost.

Three levers

Lower humidity: vent bathroom and dryer exhaust outdoors, never into the attic.

Warm the surface: add insulation or baffles so the cold surface is less cold.

Increase venting: keep soffit intake and ridge exhaust clear.

Sources

Vent Path: Soffit In, Ridge OutRead guide

Check your use case first

Five things to check before ordering

How to compare specs

When not to buy

Budget and alternatives

Common mistakes

How we check these numbers

This guide does three things: it breaks costs and conditions into checkable line items, it marks which figures come from official sources, and it flags what varies by city, year or personal situation. We do not treat a single quote as a universal conclusion, and we do not cite percentages we cannot trace.

If you remember one thing: use the checklist here to question quotes, not a single total to compare them.

KEEP READING

Keep reading

Read in order, or jump to another guide on the same topic.

All guides →

None

Top picks

Dehumidifier

Dehumidifier

Check price
Soffit Baffles

Baffles

Check price
Energy Audit

Audit

Check price

Affiliate disclosure: this page links to commercial partners; we currently pass no tracking parameters, so we earn no commission from them.

Sources